Line Array Element
Frequency Range: 55 Hz – 22 kHz (-10dB)
Frequency Response: 67 Hz – 20 kHz (± 3 dB)
Horizontal Coverage Angle (-6 dB): 100° nominal (500 Hz – 16 kHz)
Vertical Coverage Angle (-6 dB): Varies with array size and configuration
System Input Power Rating:
LF: 1000 W Continuous, 4000 W Peak (AES / 2 hour)
MF/HF: 225 W Continuous, 900 W Peak (AES / 2 hour)
Maximum Peak Output1: 131 to 141 dB SPL, 1m (frequency/bandpass dependent)
Recommended Amplification:
LF: 1000 – 2000 W into 8 Ω
MF/HF: 450 – 900 W into 8 Ω
Recommended Signal Processing: dbx® 4800, Crown® I-Tech, BSS FDS-366T, and other Digital System Controllers supported

Transducer Sections
Low Frequency: Two 2168J-1, 203 mm (8 in) dia., 76 mm (3 in) Dual Coil, neodymium Differential Drive®, Direct Cooled™
Bandpass Nominal Impedance: 8 Ω (16 Ω each transducer, wired in parallel)
Input Power Rating2:
1000 W Continuous, 4000 W Peak (AES / 2 hour)
700 W Continuous, 2800 W Peak (100 hour)
Bandpass Sensitivity: 97 dB, 1W / 1m (2.83 Vrms at 3.3 ft)
Mid & High Frequency
MID: Four 2104H, 101 mm (4 in) with 25.4 mm (1 in) diameter voice coil
HIGH: Two 2408H, 25 mm (1 in) exit compression driver, 38 mm (1.5 in) voice coil
Bandpass Nominal Impedance: 8 Ω (drivers wired in series-parallel, passive network)
Input Power Rating2: 225 W Continuous, 900 W Peak (100 hour)
Bandpass Sensitivity: 103 dB, 1W / 1m (2.83 Vrms at 3.3 ft)

Enclosure
Box Construction
Wedge frustum 5° side angle enclosure.
PlyMax® engineered wood composite structure
DuraFlexTM finish
2 handles with integrated LF ports
Suspension System
S.A.F.E. hardware, integral hinge bars nest in rigging tubes on box ends.
Quick release pins with restraining lanyards.
Set of 4 hinge bars included.
Suspend with VT4887-AF or VT4887-SF Array Frame.
Grille: Black perforated steel, foam backed
Input Connectors: Neutrik® Speakon® NL-8 and NL-4 (2x each), Pin 3+/- for Lows & Pin 4+/- for Mid-Highs